Category: C5 Corvettes

The Very Rare, Non-Replica Corvette Indy 500 Pace Cars

Published on by Scott

Dateline: 2.21.12

The Forgotten Corvette Indy 500 Pace Cars

Even if you’re not “into” Indy Car racing, the Indy 500 is a uniquely American special event. Whom ever coined the expression, “The Greatest Spectacle in Motor Sports” got it spot on. In its own unique way, it is the American equivalent of Le Mans. The expression in road racing is this, “You can win at Daytona and America knows about it. But when you win at Le Mans, the whole world knows!” Even though the event at the Indianapolis Motor Speedway is just one race in a series of races and is early on in the season, it might as well be the Super Bowl of American auto racing. When the flag comes down and the winner is declared, every city newspaper,as well as every national and local TV station reports the winner. But if you win say, the Baltimore or Los Angeles Grand Prix, very few outside the arena of motorsports will know. No, there’s only ONE Indy 500.

While pace cars have been used at the Indy 500 since 1911, the tradition of giving the pace car to the winner of the Indy 500 goes back to 1936. Tommy Milton (winner of the 1921 and 1923 races) was invited to drive the official pace car, a Packard 120, and suggested giving the pace car to the race winner. A new tradition was born. As the speeds of the Indy race cars increased, so did the demands of the pace cars. Eventually, the pace cars were specially modified versions of the street machines with enhanced engines, suspensions, and brakes. By the ‘60s, manufacturers began to sometimes offer pace car replicas to their customers. Tracking actual pace cars is a little tricky because manufacturers usually build several pace cars for the actual race and for promotional use that all pretty much look the same.

Yes, Indy 500 pace cars have become a specialty nitch all by themselves. That’s why in 1978 when it was announced by Chevrolet Continue reading “The Very Rare, Non-Replica Corvette Indy 500 Pace Cars” →

David Kimble’s Incredible Cut-Away Corvette Art Creations

Published on by Scott

Dateline: 2.13.12

The Master of Cut-Away Technical Illustration Automotive Art

Check out the slide show at the end of this post!

Please allow me to indulge myself and geeze a little. It seems that the farther north you are from the age of 50, the more times from the past begin to blur together. If you’re under 30 or 40 and are wondering what I’m talking about, just wait. I think it was somewhere around 1984 or 1985 the first time I saw one of David Kimble’s cut-away technical illustrations.

While Kimble had been working for many years as a technical illustrator for the US Navy, an RV company, the Chaparral Racing Team, the Harrison Racing team, and Sports Car Graphic Magazine, I believe that it was his 1984 technical illustration of the then-new 1984 C4 Corvette that put him on the automotive map. If it wasn’t his ‘84 Corvette cut-away that I first saw, then it was his Ferrari F40 cut-away that appeared in Motor Trend that definitely caught my attention. In the early ‘80s I was a freelance commercial artist specializing in machines. There was a wonderful magazine for commercial and graphic artists back then titled, “Step-By-Step Graphics” that was truly awesome for aspiring artists. Each issue featured several articles that took you on a step-by-step overview of exactly how the artist created their works. It was a terrific magazine.

Here’s the artist, himself, David Kimble, holding his new book, “Cutaway – The Automotive Art of David Kimble.”

One issue had a feature story covering David Kimble’s unique approach to the classic “cut-away” style of technical illustration. I was already familiar with James A Allington’s cut-away illustrations from a series of Shell Oil print ads that ran in the late 60s featuring famous road racing cars, such as the Ford GT40, Jim Hall’s Chaparral, and others. But Kimble’s style was quite different and unique. Where as most cut-away technical illustrations show what’s under the car’s body by illustrating a section of the body that seemed to be snipped away, Kimble created a new dimension to the “cut-away” body sections. David’s illustrations looked as if most of the car’s painted body was transparent. Parts, such as tires, wheels, floorboards, dash panels, transmission cases, valve covers were either transparent or used the traditional “cut-away” technique. When you look at a Kimble technical illustration, you experience a journey of discovery. For us gearheads, Kimble’s art satisfies the the question, “What’s under there?” Continue reading “David Kimble’s Incredible Cut-Away Corvette Art Creations” →

Vette Polls: Vote For Your Favorite Special Edition Corvette

Published on by Scott

Dateline: 12.28.11

It’s time to do your patriotic Corvette duty and CAST YOUR VOTE!

Your local Corvette polling place is at the bottom of this post

The other day we were talking about the Ron Fellows Spring Mountain Special Edition 2012 Z06 Corvette. After posting the story I was doing some followup reading and found one post that called the car “boring.” Really? What part? Are we becoming a wee bit jaded with Special Edition Corvettes because they aren’t something other than a coordinated package of performance parts? Me thinks so.

This is an aside, but I’ve been reading similar blather on the net about Corvettes in general. I call it “goofy sniping crap.” You know what I’m talking about, the endless complaining that the Corvette isn’t a Nissan or a Porsche, or a world car, or whatever. The car is either too big (it’s about the same size as a 911 Porsche), it’s too heavy (the Nissan GTR is almost 600 pounds MORE than a Z06), it’s too expensive for younger buyers (and the Porsche and Nissan is cheaper?), materials are low grade (they want cheap, expensive materials?), and on and on.

But the fact remains that; 1. We’re in a deep economic recession, and 2. Even the base model (costing sometimes less than $50,000 if you shop around) delivers more performance per dollar than any other “sports car” you can buy. PERIOD! Is the base Corvette the baddest boy on the block? No. But if that’s what you need to feel good, be prepared to pony up three times as much as a Corvette for a top level Porsche. No, modern Vettes are tight, well-engineered performance cars that can give an owner years of dependable automotive performance pleasure for as little as $50K. Sorry for the digression.

So what’s up with all the special edition Corvettes? They’re just that, “special.” perhaps the disconnect for some is how one defines “special.” Former Corvette engineer and race car driver gave a little bit of insight into what it takes for a major manufacturer like Chevrolet to build special editions. John was largely credited with coming up with the concept for the ‘96 Grand Sport. “Monday morning quarterbacking” is for many, a sport un-to-itself. “Well, it’s just this and that, and why didn’t they do this and such, and wouldn’t you think that they could have…” Heinricy revealed that clearing out the assembly line time and pulling all the parts needed to build 1,000 Grand Sports was a major pain in the butt. For a tuner shop, 1,000 of anything would be a big deal. But for a big manufacturer, small numbers of specialty cars is a big headache. Continue reading “Vette Polls: Vote For Your Favorite Special Edition Corvette” →

2004 Commemorative Edition Z06 Corvette – The “Best” C5 Vette?

Published on by Scott

Dateline: 12.4.11

A Look Back at the Last of the C5 Corvettes. Was this the “Best” C5?

For the last six months in my VETTE Magazine monthly column, I have been looking back at the end of each generation Corvette with the question, “Was this the best C_ Corvette?” (with the exception of last month where I covered the Greenwood No. 49 Corvette race car that sold at the RM Monterey Auction in August ‘11). The tern “best” is subjective because it depends on what an owner’s purpose for the car happens to be. It’s easy to make a case that the “Big Brake” ‘62 Corvette Fuelie racer kit and the ‘67 aluminum head 427/437 L89 Corvettes were the “best” of their respective generation cars based on stout performance. potential. Same with the LT5 optioned ‘96 Collector Edition Corvette with its fat ZR-1 wheels and tires. The ‘82 Collector Edition Corvette was a completely different animal. “Stout” it was not, but it was arguably the most refined of the C3 Corvettes with the liftback rear hatch adding functionality that should have been with the car from the beginning in ‘68.

The C5 2004 Commemorative Edition Z06 had what was arguably the most delicious collection of creature comforts, plus what was then the pinnacle of factory performance parts all included in a beautiful, distinctive package. Briefly, the ‘04 Commemorative Edition Z06 had the following unique features that, from a performance point of view, made it “the best C5: unique paint, stripes and graphics, special interior trim, the 1SB option package, the Z06 suspension, the ultra-stiff Z06 structure, the LS6 405-horsepower engine, AND the carbon fiber hood. When the customer took delivery of their 2004 Commemorative Edition Z06, they were driving home in a totally maxed out C5 Corvette. Continue reading “2004 Commemorative Edition Z06 Corvette – The “Best” C5 Vette?” →

Corvette Holiday Shopping Made Easy – C5 & C6 Corvette Jackets!

Published on by Scott

Dateline: 11.18.11

Your special Corvette person is going to look REAL GOOD in one of our Corvette Jackets!

To check out our full line of C5 and C6 Corvette leather and cloth jackets, CLICK the above image.

Corvette people can be a real pain when it comes to holiday shopping. I mean, what do you get a Vette owner after they have their dream Vette?

Here’s a suggestion. ANOTHER CORVETTE!

I'm sure this would do just FINE!

But seriously folks, it CAN be a challenge buying for your favorite Corvette person. So, over the next few weeks, we’ll be sharing with you many of the really nice, unique gifts that we’re sure will delight your special Corvette person.

To check out our full line of C5 and C6 Corvette leather and cloth jackets, CLICK the above image.

Today we want to tell you about our fantastic Corvette leather and cloth jackets. We have seven different style jackets, decorated with C6 Corvette logos, C6 Z06 logos, C6 Centennial logos, and C5 logos.

The jacket styles include:

* Lambskin Leather Jackets
* Wool Varsity Jackets with Leather Sleeves
* Black Aviator-Style Cloth Jackets
* Black & Red Block Twill Jackets
* Black with Red Trim Twill Twill Jackets
* Lightweight Black Oxford Jackets
* Spice Heavyweight Twill Jackets

Prices range from $299.95 for the Lambskin Leather jackets to $88.95 for the Aviator-style jackets. Sizes include Medium, Large, X-Large, XX-Large, and XXX-Large. (sorry, no Tall sizes) The “sizes” of our jackets run true – meaning that whatever size your favorite, most comfortable jacket happens to be, THAT’S the size to order. All jackets are “Men’s Cuts.” The jackets are cut to be comfortable while driving. Continue reading “Corvette Holiday Shopping Made Easy – C5 & C6 Corvette Jackets!” →

Corvettes Unlimited of Vineland New Jersey’s Glass & Steel Show

Published on by Scott

Dateline: 10.26.11 (This is our 200th post!)

Corvette & Classic Car Autumn Fun in New Jersey

(Check out to six slide shows at the bottom of this post!)

Autumn in New Jersey makes up for Summer in New Jersey. If you can live in Jersey, you can live almost anywhere, as we get it all – LOTS of snow in the winter, below freezing temps in the winter, 100-degree temps with 95% humidity in the Summer and an occasional huricane. But when October rolls around, it’s PERFECT! And a fantastic time for a car show.

Corvettes Unlimited of Vineland, New Jersey changed their venue for their annual car show from Wheaton Village, in Millville to the Michael Debbie Park in Buena Vista. To draw more attendees, the club opened up the show to classic and muscle cars, hence the new name for the show, “The Glass & Steel Show.” While it turned out there there was more steel than glass, it was a delightful show just the same. I for one enjoyed the steel side as much as the glass side.

I took LOTS of pictures, so we have several slide shows to share with you below. Enjoy! – Scott

The People's Choice Award went to: Michael T. Cafarelli, of Minotola, N.J. - 2006 white coupe. The Best of Show Award went to: Gary & Patty Rickets of Salem, N.J. - 1965 silver & red Sting Ray coupe.

Here are the winners. All of the Corvettes in the show can be seen in the below slide shows.

Stock: 1963-1967 – 1st. place: Ole Olson, Northfield, N.J. – 1966 Red Convertible
Stock: 1968-1973 – 1st. place: Joe Biaselli, Vineland, N.J. – 1973 blue convertible
Stock: 1968-1973 – 2nd place: Louis Rodolico, Aston, Pa. – 1976 red coupe
Stock: 1968-1973 – 3rd. place: John O’Brien, Egg Harbor Township, N.J. – 1973 orange coupe
Stock 1974-1982 – 1st. place: Oscar Pierce, Bridgeton, N.J. – 1978 red coupe
Stock 1974-1982 – 2nd. place: Richard Thomas, Pittsgrove, N.J. – 1982 silver coupe
Stock 1983-1996 – 1st. place: Joseph Burrell, Williamstown, N.J. – 1984 red sport
Stock 1983-1996 – 2nd. place: Wayne Wright, Little Egg Harbor, N.J. – 1996 silver convertible
Stock 1983-1996 – 3rd. place: Jon E. Bowen, Pennsville, N.J. – 1994 dk. red coupe
Stock 1997-2004 – 1st. place: Carmen Petrongio, Vineland, N.J. – 2002 blue coupe
Stock 1997-2004 – 2nd place: Linda & Lou Deman, Nesco, N.J. – 2003 red convertible
Stock 2005-2012 – 1st. place: Dennis Enoch, Cherry Hill, N.J. – 2008 black convertible
Stock 2005-2012 – 2nd. place: John Ormsby, Glassboro, N.J. – 2008 red convertible
Stock 2005-2012 – 3rd. place: Buster Petonglo, Newfield, N.J. – 2009 blue Z06
Modified 1953-1967 – 1st. place: Paul Rickets, Pennsville, N.J. – 1966 blue convertible
Modified 1968-1975 – 1st. place: Bill& Dawn Merola, Egg Harbor Twp., NJ 1973 red convertible
Modified 1976-1982 – 1st. place: Bill & Sandy Ward, Mullica Hill, N.J. – 1982 grey coupe
Custom 1953-2012 – 1st.place: Gary & Patty Rickets, Salem, N.J. – 1965 silver coupe
Custom 1953-2012 – 2nd. place:  Jonathan Settrella       Bridgeton, N.J. – 1976 red coupe
People’s Choice: Michael T. Cafarelli, Minotola, N.J. – 2006 white coupe
Best of Show: Gary & Patty Rickets, Salem, N.J. – 1965  silver coupe

To access the slide shows and Continue reading “Corvettes Unlimited of Vineland New Jersey’s Glass & Steel Show” →

Vette Videos: Visit Bowling Green Corvette Assembly Plant… On Your Computer!

Published on by Scott

Dateline: 10.13.11
Check out the state-of-the-art Bowling Green Corvette factory on “Ultimate Factories.”

Back in the olden days, you know, pre-Bowling Green, if you wanted to buy a Corvette, you simply went to your friendly local Chevrolet dealer and bought your car. While some Corvette buyers may have been aware that their Corvette was built in St. Louis, most couldn’t have cared less, and were more focused on the experience of owning and driving their Corvette, rather than where it was assembled.

All Corvettes from 1953 to 1980 were built in the old St. Louis assembly plant. If you go back and read early road tests from the ‘60s and ‘70s you’ll see a consistent complaint – spotty to poor build quality. Some cars were built very well, most okay, and too many not good at all. It was a time when you didn’t want a “Monday car” for obvious reasons. Owners and magazine writers complained and GM listened. By ‘77 GM started looking for a new Corvette facility. Four location candidates were identified: Waco, Texas, Wichita, Kansas, Montgomery, Alabama, and Bowling Green, Kentucky. The little town of Bowling Green, Kentucky  won the contest after granting GM some serious tax breaks.

Once the deal was signed, GM had just 15 months to convert the old Chrysler AirTemp plant into a state-of-the-art assembly plant, ONLY for Corvettes. Floor space was enlarged to a million square feet – about 22 football fields. This move on GM’s part put to rest all concerns as to how serious GM was about building Corvettes. On June 1, 1981, Kentucky Governor John Brown drove the very first Bowling Green-built Corvette off the assembly line. (I wonder how much THIS car will go for at auction some day?) This was arguably one of THE most important developments in Corvette history. Continue reading “Vette Videos: Visit Bowling Green Corvette Assembly Plant… On Your Computer!” →

Corvettes Score 23% in Edmonds 100 Greatest Chevrolets List

Published on by Scott

Dateline: 9.27.11
Of the 23 Corvettes Edmonds picked, vote for your favorite at the end of this post!

Is the C6 ZR1 Corvette the "Best Vette Ever?" Cast your vote below!

Back on September 14, 2011 we shared with you the results of Chevrolet’s Centennial birthday celebration popularity contest to find the most popular Chevrolet of all-time. Like American Idol or Dancing With the Stars, the Greatest Chevy contest was a popularity contest. Certainly an argument could be made as to why the C6 ZR1 is the greatest Chevy of all-time because of its overall performance, the LS9 engine, top speed, etc. But that’s not what Chevrolet wanted to know. They wanted to know what was the most “favorite” Chevy of the last 100 years.

Well it seems that the people at Edmonds.com decided to draw up their own list of great Chevys. The 100 top Chevys list isn’t limited to production Chevrolet cars, but includes, race cars, prototypes, and show cars. Of the 100 cars in the list, 23 were Corvettes! Pretty impressive for a low-volumn, limited usage automobile. The list doesn’t appear to be in any specific order and there’s a slide show of all 100 cars too. Also, the story does not explain how this list was drawn up. Regardless, it’s interesting just the same. To review the Edmonds story, CLICK HERE.

Here are the 23 Corvettes:
1. 1953 Corvette – The First Corvette.
2. 1955 265 V8 Corvette – The first V8 Vette.
3. 1957 Fuel Injected Corvette – The First Fuelie Corvette
4. 1956 SR-2 Corvette Race Car
5. 1957 Corvette SS Race Car
6. 1959 Stingray Racer – Bill Mitchell’s race car playtoy Continue reading “Corvettes Score 23% in Edmonds 100 Greatest Chevrolets List” →

Marty Schorr’s “Car Guys Who Lunch” Car Club – Start Your own Chapter!

Published on by Scott

Dateline: 9.13.11
“There’s only ONE rule – Be a real car guy, or be GONE!”
– Martyn L. Schorr, OWner of Sarasoda Cafe Racers Car Club

Marty will probably blush over this, but I’ll say it. Marty Schorr has made a larger contribution to not just the Corvette world, but to automotive hobbyists all over. Marty was at the helm of High-Performance CARS magazine for nearly 20 years. But “CARS” wasn’t the only pub Marty drove. He was also editor of Chevy Action, Speed and Super Car, the founder of VETTE Magazine and Thunder-AM, plus dozens of CARS Annual special editions and a few dozen stand alone car books. His latest book “Motion Performance – Tales of a Muscle Car Builder” is the official history of the Baldwin-Motion experience, as told by the man that helped create the whole shebang! As front man for the Baldwin-Motion experience, Marty provided those wonderful, “in-your-face” PR, advertising, brochures, and catalog campaigns for the successful Phase III Supercars. The list just goes on and on. “Prolific” is an understatement. And now, we should also add “car club impresario” to Marty’s list of accomplishments.

Marty isn't late, but as Maitre d’ café & CCO (Chief Communications Officer), he likes to be at the restaurant first.

Car Guys Who Lunch started in 2003 when a group of dudes with gasoline in their veins got together for burgers and bench racing in a cafe in Sarasota, Florida. A good time was had by all with everyone agreeing, “Lets do it again!” Within a year, “Sarasota Cafe Racers” was officially launched, or should I say, “lunched.” (Arr, arr!) There are two aspects of Car Guys Who Lunch that make it so unique.

Continue reading “Marty Schorr’s “Car Guys Who Lunch” Car Club – Start Your own Chapter!” →

Vette Shows: 2010 Vettes at Glasstown Engines

Published on by Scott

Dateline: 9.10.11
Show us your engines!

I would venture to say that the most common question Corvette owners get is, “What year is your Vette?” Everyone wants to know how new or how old your Corvette happens to be. The second or third most common question owners hear is “What’s under the hood?” Now, we’re getting down to business. Were it not for stout, high-performance engines, Corvettes would have been just another Detroit pretty face. Two aspects of Corvettes that simply CAN NOT be disconnected on are “looks” and “power.”

In October 2010 when I attended the Vettes at Glasstown Corvette Show I took LOTS of pictures of Vette engines. Since most everyone had their hoods up and were saying in Corvette body language, “Hey! Look at my engine!” why not take pictures? When looked at over the span of nearly 60 years, you can clearly see visual phases in under-the-hood appearance.

From ‘53 to ‘66 engines were amazingly simple and 95% of everything was easily accessible. As emissions controls crept in, things got a little busy and by the end of the C3 generation, all kinds of things seemed to be growing under the hood. The first of the C4 engines had a big, honk’n cover over the cross-fire injectors and by ‘85 Vettes were again full-blown, fuel injected machines. The L98 and the LT1 and LT5 engines all had unique-looking fuelie designs. The LT-5 engine that powered the C4 ZR1 was as visually stunning as the old 427/435 big-blocks.

[nggallery id=31]

With the arrival of the new LS-series in ‘97, the all-aluminum engines started wearing engine covers. Open the hood of a C5 or C6 Corvette and the biggest and first thing you see is the engine cover. The covers aren’t really needed, but they sure look cool and are now Continue reading “Vette Shows: 2010 Vettes at Glasstown Engines” →

Say, what’s the easiest way to keep up with what’s happening at CorvetteReport.com?

Published on by Scott

Dateline: 8.31.11
We’ve made it “easy as pie” for ya!

Ever since we dropped a ZR1 LS9 engine into our blog site, we’ve been posting at least once a day, sometimes more. At first, I thought, “How in the world am I going to find interesting Corvette material to post every day?” HA! Silly me! With nearly 60 years of Corvettes to talk about, I’ve concluded that I could do this for another 100 years and not run out of material to cover! The topic is so broad and deep, there’s ALWAYS something fun and interesting to talk and write about in the world of Corvettes!

Enter your email address:

So, to make it fall-off-a-log easy for you to keep up with us, we’ve created the above handy-dandy, sign up form. It’s not a “newsletter,” just a brief email announcement letting you know that there’s a new post at CorvetteReport.com. The email you will receive will look like this… Continue reading “Say, what’s the easiest way to keep up with what’s happening at CorvetteReport.com?” →

Vette Shows: The Sights of C5 Corvettes at the 2011 30th Corvettes at Carlisle Show

Published on by Scott

Dateline: 8.30.11
2011 Corvettes at Carlisle Week continues with coverage of 1997 to 2004 C5 Corvettes!

Chevrolet sold just under 250,000 C5 Corvettes during its eight-year production run.  While under the leadership of Corvette chief of engineering Dave Hill, the Corvette moved more into the realm of a finished GT car than ever before. The new LS1 engine was stronger, the chassis was more rigid, the ride was more forgiving and precise, and the interior had more room for passenters and storage. And thanks to the C5-R Corvette Racing program and plenty of tuners, the new GT Corvette was more of a brute than it had ever been – but now it had refined manners to go along with its grunt.

[nggallery id=23]

The high-water performance mark for the C4 Corvette came with the ‘’93 to ‘94 405-HP LT-5-powered ZR-1. By 2002, the C5 LS6-powered Z06 packed the same horsepower figures as the later C4 ZR-1s, but at a substantially lower price. A ‘95 ZR-1 cost around $68,000 to start. The C5 2002 Z06 came in at the bargain price if $50,150. Seven years later and nearly $18,000 LESS, now that’s what I call progress! Continue reading “Vette Shows: The Sights of C5 Corvettes at the 2011 30th Corvettes at Carlisle Show” →