Founding Fathers Pt 4 of 6: Corvette Godfather, Zora Arkus-Duntov

Published on October 23, 2018January 31, 2019 by Scott

Zora Arkus-Duntov: The Performance Godfather of all Corvettes

Dateline: 10.23.18 – One of the definitions of the word, “godfather” is; “one that founds, supports, or inspires”. Of all of the Corvette’s “Founding Fathers” none are more deserving of the term than Zora Arkus-Duntov. It is not an exaggeration to say that were it not for Duntov, the Corvette never would have made it past 1970!

Although the Corvette fit the definition of a “sports car”, when Chevrolet released the car in 1953, they said that the car was, “not a sports car”. But when Zora saw the Corvette at the 1953 GM Motorama in New York City, he said that it was the most beautiful car he had ever seen, and knew instantly that he wanted to be a part of the new Corvette team.

Zora was born on December 25, 1909 and his birth name was “Zachary Arkus”. Both of his parents were Russian Jews living in Belgium. His mother was a medical student and his father was a mining engineer. After the Russian Revolution the family moved back to Leningrad, Russia, but his parents divorced. His mother’s new partner was Josef Duntov. Years later, Zora and his brother, Yura added the surname, “Duntov” to theirs.

Josef Duntov was an engineer for the Soviet government and was transferred to Berlin, Germany. Zora loved Berlin. When he wasn’t attending classes at the Charlottenburg Technological University, he was drawing cars, writing papers, riding motorcycles, roaring around in his Type 30 Bugatti, and chasing girls. When Zora met Elfi Wolff, a beautiful German dancer with the Folies Bergere, it was love at first sight, and the couple married in France in 1939. When WW-II broke out in 1939, Zora and Yura wanted nothing to do with fascism, and joined the French Air Force. But when France surrendered, the entire Duntov family made plans to get out of France and immigrate to America.

All Zora ever wanted to do was build and race cars. After the family settled down in New York, Zora and Yura started the Ardun Mechanical Corporation, a machining company. Quickly, the company became a success, receiving an “A” classification with the Army Air Force Quality Control. Government work for the war effort made Zora and Elfi wealthy. After the war Zora and Yura made their contribution to the burgeoning hot rod industry that set the stage for Duntov’s part of the Corvette story.

Ford brought the V8 to the masses and it wasn’t long before guys started hot rodding the Flat-head V8 Ford. The design was cheap and simple, but didn’t breathe very well. Zora designed an aluminum, overhead valve hemi-head bold-on kit for the popular Ford flathead engine. The Ardun OHV Hemi heads took output from 100-hp to 160-hp; a 62-percent increase! They offered a conversion kit, a complete engine, and an all-out, 200-hp racing engine. While terrific as a concept, Zora wasn’t a “development engineer” and didn’t have the patience to sort out details. Through a series of business mistakes, the company eventually folded. Also, in 1946 and 1947 Zora had two failed qualifying attempts at Indy.

Photo: K. Scott Teeters – Duntov wanted to take a team of Corvette SS race cars to the 1957 24 Hours of Le Mans race, but the AMA Racing Ban stopped Zora’s Le Mans assault.

By 1948 Zora was looking for a racecar company to work for and took a job working for Allard England. Without a company to run, Duntov was able to stay focused on engineering and development work for Sydney Allard’s sports racing cars. In 1949 Zora raced an Ardun-powered Allard J2 at Watkins Glen, but had braking problems. Then in 1952 Zora drive a new Allard J2X at Le Mans, but broke an axle at the 14-hour mark.

Working for Allard was fun, but Zora knew there was no future there. In 1952 he came back to New York and started looking for employment with an American car company. Duntov applied with Chrysler, Ford, Lincoln-Mercury, Ford, and General Motors. Chrysler suggested that his racing engineering skills would be more suited to much smaller companies. He even tried Jaguar, but was rejected. A letter to GM’s Chief Engineer, Ed Cole in October was responded with an invitation to, “…stop by if you’re ever in Detroit.” But Cole passed Duntov’s letter to his head suspension/chassis engineer, Maurice Olley, who responded to Zora on January 5, 1953 with an invitation for an interview.

Around this time Duntov had his “Oh, WOW!” moment upon seeing the Corvette at the 1953 Motorama. After a long series of letters and interviews, on May 1, 1953, Zora Arkus-Duntov was hired by GM to work in the Chevrolet Engineering Department under Maurice Olley, with a starting salary of $14,000.

Zora and Elfie Duntov didn’t fit into the GM corporate culture, and Olley and Duntov did not get along at all. Zora solved engineering problems with an intuitive sense of mechanics – Olley wanted to see calculations. GM executives socialized at country clubs and played golf – Zora went to races and played around with boats on his weekends. Elfie passed on invitations to social lunches, preferring to spend time with her entertainer friends. Yes, the Duntov’s were misfits in GM’s stuffy gray suit world.

Three weeks into his employment Zora was almost fired by Olley because he announced that he was taking off to drive for Porsche at Le Mans in June. Although Duntov worked for Olley, he reported to Ed Cole, who begrudgingly let him go racing, but without pay.

Fortunately for all of us, Duntov got beyond his issues with Olley and was transferred to the GM Proving Ground. The work was beneath him, but he needed a job and soldered on. It was a speech he gave at a Lancing SAE meeting about how high-performance programs can enhance efficiency and reliability of passenger cars, and that the Corvette would be the perfect platform for such R&D work. While other engineers were more thorough in their development work, Zora had the deep understanding of racing, and the enthusiasm that could make Chevrolet an authority on performance cars.

By the time Duntov got to work on the Corvette, his initial conclusion was, “… the car really stunk.” Zora was coming from a racing perspective and the Corvette was never intended to be a racer. He said, “Since we can not prevent people from racing Corvettes, maybe it is better to help them to do a good job at it.” Thus began the evolutionary transition of a car that was never designed to be a racer. Duntov was the perfect man for the job; truly, there was no one else in Detroit in 1954 that could have made Earl’s beauty queen sports car into a fearsome racer. The super-successful C5-R, C6.R, and C7.R Corvette Racing Team owes it all to Zora Arkus-Duntov – and a ton of work.

Duntov’s serious work began late in 1955, and by February 1956 at Daytona Beach, his trio modified 1956 Corvettes set speed records. From there it was a class win at Sebring and “Bring on the hay bales!” 1957 saw the introduction of the 283 Fuelie and the first of a long series of RPO “Racer Kit” Chevrolet-engineered parts for racing Corvettes. Zora wanted to take a team of Corvette SS Racers to Le Mans in 1957 but the AMA Racing Ban stopped him.

Take a test drive with Zora!

By the late 1950s, thanks to the parts Duntov and engineer Mauri Rose developed for the RPO program, privateer Corvette racers were winning championships. Then, closing out the C1 generation, the Grady Davis Gulf One Corvettes took the 1961 SCCA B/Production and the 1962 A/Production Championships. To jump-start the C2 Sting Ray, Duntov launched the now-legendary RPO Z06 racer kit and the Grand Sport Corvette. Again, Zora wanted to take a team Grand Sports to Le Mans, but GM’s strict AMA Racing Ban got in the way and only five Grand Sports were built.

Duntov was relentless in pushing performance and created numerous mid-engine Corvettes prototypes. “Brakes” had been troublesome for racing Corvettes since 1956. By 1965, all production Corvettes had 4-wheel disc brakes. When the big-block was introduced in 1965, Chevrolet realized that cubic-inches were the easiest way to more horsepower. By 1967 Duntov introduced the fearsome 427 L88. From 1967-to-1969 only 216 L88 Corvettes were built, and are super valuable today. In 1969 427 ZL-1 was an L88 with an aluminum block, offered L88 power, with small-block weight.

In 1970 Zora released the 350 LT1, best small-block Corvette to that date. From 1970-to-1972 RPO ZR1 was the Racer Kit for small-block racers. And lastly, Zora was responsible for the 1974, customer applied, “Greenwood” widebody kit, available from the Chevrolet Performance Parts catalog. When Duntov retied in December 1974 he had a mid-engine Corvette in the works, but management said, “We’re selling all the Corvettes we can, why to we need a mid-engine Corvette?” Sure, “business is business” but it would have been so cool.

Without Duntov supplying raw performance, even Bill Mitchell’s beautiful Sting Ray wouldn’t have saved the Corvette. The Corvette survived because of racing and Corvettes raced because of Duntov. Therefore, Zora Arkus-Duntov ultimately deserves to title as “Godfather of the Corvette”. – Scott

PS – You can readpervious installments of my “Corvette’s Founding Father Series from the bleelow links:

Corvette’s Founding Father’s, Pt 1 – Harley Earl, HERE.

Corvette’s Founding Father’s, Pt 2 – Ed Cole, HERE.

Corvette’s Founding Father’s, Pt 3 – Bill Mitchell, HERE.

And coming soon: Larry Shinoda and Peter Brock.

I’ll be offereing a free E-Book with all five of the Corvette’s Founding Fathers, soon!

Founding Fathers, Pt 2 of 6 – Ed Cole, the Corvette’s Godfather, Pt 2 of 6

Published on October 2, 2018January 31, 2019 by Scott

Ed Cole was the Corvette’s Corporate Angel

Dateline: 10.2.18 (All images GM Archives) The Corvette is arguably the greatest enigma in Detroit history. Every car line has to carry its own sales weight. In 1957 6,339 Corvettes were sold, the same year, Ford sold 21,380 Thunderbirds. Corvette sales didn’t surpass that figure until 1963 when 21,513 Corvettes sold. How did the Corvette survive? The Times and Angels.

It was the Wild West days when William Durant founded General Motors on September 16, 1908. By 1910 Durant lost control of General Motors to a bankers’ trust. In 1912 Durant started Chevrolet, secretly bought back controlling shares of General Motors, reorganized in 1916 as “General Motors Corporation”, only to lose control again in 1918.

Successful industrialist Alfred P. Sloan, became vice president of GM in 1918, then president 1923, and brought order and structure to the chaotic company. Sloan created autonomous operating divisions, centralized policies, planning, annual model changes, platform engineering, and emphasized “styling.” Sloan hired Harley Earl specifically to “style” GM cars. Eventually, GM owned 43-percent of all car sales! By 1955 GM sold over 5 million vehicles and was the first corporation to post $1 Billion dollars profit!

Ed Cole was born on September 17, 1909 and grew up on his family’s dairy farm. As a kid, Ed designed, built, and sold radio sets and when he was old enough, the natural mechanic started working at an auto parts supply store and building hot rods. For a time, Ed thought he wanted to be a lawyer, but that “car thing” got in the way.

In 1926 GM bought the Flint Institute of Technology and renamed it, “General Motors Institute”, focusing on creating industry and business leaders through a co-op program, teaching all aspects of automobile manufacturing. Cole enrolled in 1930 and was so bright that by 1933, without finishing his GMI education, he was hired by Cadillac’s engineering department. During WW-II Ed became the chief design engineer on GM’s light tanks and combat vehicles program. In 1946 Cole was promoted to chief engineer at Cadillac and was the lead engineer on the groundbreaking, 1949 Cadillac 331 OHV high-compression, high-revving engine. Ed Cole was the “go-to” guy in GM engineering, with great things ahead of him.

There was a tremendous economic boom after WW-II thanks to pent up consumer demands after the long depression and war, but by the early 1950s a slowdown was in the making. A month after the Corvette made its debut at the New York Motorama; Harlow H. Curtice became the President of GM and understood that to make money, you have to spend money. In February 1954 Curtice announced a $1 Billion dollar plant and facilities expansion plan. Ford announced their own $1 Billion dollar capital expenditure and Chrysler committed $500 Million for expansion. Curtice doubled down with another $1 Billion and third triage of $1 Billion in 1956! Time Magazine voted Curtice “Man of the Year” for 1956. Curtice said, “General Motors must always lead.” GM was the largest corporation in the world and Ed Cole’s star was rising.

With the success of the Cadillac 331 engine, Cole was in a prime position. In 1952 Chevrolet general manager Tom Keating promoted Ed to Chevrolet’s chief engineer. Cole’s major assignment was the replacement for the 23-year-old Chevy Stovebolt Six. A V8 project was in the works, but Cole hated it and started from scratch, instructing his team that the engine should be compact, lightweight, and powerful. By the fall of 1954, the new 265 V8 was ready for 1955 Chevrolet cars, including the Corvette. No one dreamed the basic design would still be produced over 60 years later. The next step in Cole’s career was Chevrolet general manager in 1956.

In 1952/1953 a 43-year-old Russian engineer seeking employment named Zora Arkus-Duntov sent letters to Studebaker, Chrysler, Lincoln-Mercury, Ford, and General Motors, explaining his background in engineering and racing. Duntov was told that he’d find better opportunities with smaller companies, because big car companies make bread-and-butter vehicles, and don’t have much need for his skills. Zora wrote two letters directly to Chevrolet engineering chief, Ed Cole. In November 1952 Cole personally responded with, “… if you are ever in Detroit, let me know.” Duntov wasn’t happy, at least is wasn’t, “Thanks, but no thanks.”

As providence would have it, Zora went to the GM Motorama at the Waldorf Astoria Hotel and “fell in love” with Harley Earl’s EX-122 “Corvette” concept car. Years later Duntov said, “… I thought it was the most beautiful car I had ever seen…” Just before the event, Maurice Olley, Ed Cole’s chassis and suspension man, was given Duntov’s first letter to respond to. On January 5, 1953 Olley wrote to Duntov, “If you are still available, and would consider employment with Chevrolet Engineering, we can arrange an interview.” After numerous letters and an interview in March with Cole and Olley, Duntov was offered a job as an assistant staff engineer, with a salary of $14,000. On May 1, 1953, Duntov was “let in the door” and things would never be the same.

Ed Cole’s motto was, “Kick the hell out of the establishment!”. Cole also hired Frank Winchell and three-time Indy 500 winner and engineer, Mauri Rose. Duntov and Rose hit it off great. Their boss, Maurice Olley, was a quite Englishman who did not like outbursts of enthusiasm; such as whistling. Rose could be abrasive and Duntov was outgoing and gregarious. It didn’t take long for Duntov and Olley to start chaffing. The GM blue/gray suit world was a very different from Zora’s European continental culture. The culture clash was shocking to Duntov.

Olley did not like Zora’s “Let’s try this!” style of engineering, he wanted calculations. Soon, Olley suggested Duntov might consider employment somewhere else. The final straw came when Duntov told Olley he was off to the 24 Hours of Le Mans drive for Allard. Olley said, “No!” so Duntov went over his head to Cole, who wasn’t much happier. Ed explained that Maurice was retiring soon and Zora was in good position to fill Olley’s place. When Zora explained that the Allards used Cadillac engines and engineers for assistance, Cole grudgingly agreed, but Duntov’s junket would be without pay. Zora was so put off, he bought a one-way ticket, intending to not return, and send for Elfi later! I’m sure that Ed Cole’s colleagues were telling him, “Ed, he’s all yours!” Duntov would be both “angel and devil” for Cole for the rest of his career at GM.

Although Cole was a corporate man, in his heart he was a car guy, and knew that the new 265 Chevy engine would be hot. Cole decided that two 1956 Chevy 210s should run the Pikes Peak Hill Climb with Duntov as part of the team and driver. The project was very successful with the cars breaking records. At the celebration party, Duntov proclaimed, “We ought to introduce the 1957 Corvette in a spectacular manor… lets show how fast the car will go!” Cole said, “Sure! How fast?” Duntov answered, “150-miles-per-hour!” Cole responded, “Yea, we should do that.” Duntov, being from another culture, thought Cole was serious!

Back at work, Duntov told his team, “Ed Cole said we should make a 150-mph Corvette.” So, the team set about the task. After some impressive performances with a heavily-modified mule 1954 Corvette with a 265 engine using a Duntov cam and aero tricks of the day, a team of three Corvettes went to the 1956 Daytona Beach Speed Trials. With John Fitch, Betty Skelton and Duntov driving, records were broken and the publicity was great. Cole was so thrilled; he proposed a three-car team to race at Sebring. Shockingly, Duntov told Cole that he wasn’t interesting in racing streetcars, so Cole put racer and engineer John Fitch in charge of the four-car Sebring effort. Duntov couldn’t resist a racing experience and joined the group of Chevrolet engineers. The Corvette took two class wins and Chevrolet ran their famous “Real McCoy” ads.

Later in 1956, Duntov heard that Harley Earl wanted to take a D-Type Jaguar, make a new “Corvette” body, and drop in a Corvette engine. This might have been a ploy, but Duntov said, No way!” Thus began the Corvette SS Racer project. Despite an embarrassing Sebring debut, Duntov was confident he could get the car ready for a three-car team for the 24 Hours of Le Mans. Unfortunately, GM chose to enforce the 1957 AMA Racing Ban. Not even Ed Cole could help.

The best Cole could do was to put Duntov and Mauri Rose in charge of a new “Off Road” parts program. Duntov handled the engineering and Rose worked with racers to field test the parts. This was the beginning of the Duntov “Racer Kit” series of options for Corvette customers. Cole’s idea birthed legends, including; 1957 RPO 684, 1963 RPO Z06, 1967 RPO L88, 1970 RPO ZR1, and many more. Ed Cole went on to become group vice president in 1961, executive vice president in 1965, and GM’s president in 1967.

Cole faced mandatory retirement from GM in 1974 at the age of 65. He immediately went to Checker Motors Corporation (Checker Cabs) and became chairman and CEO and was also chairman of International Huskey. Cole was an avid flier and a pilot. On May 2, 1977 Cole was tragically killed flying his private twin-engine Beagle B.206 Series 2 plane near Kalamazoo, Michigan.

1998 the National Corvette Museum launched there Hall of Fame. Ed Cole was one of the six men inducted that also included; Harley Earl, Zora Arkus-Duntov, Bill Mitchell, Joe Pike, and Larry Shinoda. – Scott