Hanspeter Boehi from Muenchenstein, Switzerland builds a spot-on replica of the most important concept Corvette ever!
Dateline 2-4-18, Photos by Hans Peter Bohi and GM Archives – This article first appeared in the April 2018 issue of Vette Magazine.
The 1965/1966 Mako Shark-II set down the basic look and proportion for all Corvettes going forward. To understand the Mako Shark-II, we have to get into the mind ofGM VP of Design, Bill Mitchell. His task was to see the future and then pull it into reality through his designers and stylists. Mitchell didn’t “draw” a single line of either the Sting Ray or Mako Shark-II, but he knew what he wanted.
The 1982 Collector Edition Corvette finned aluminum wheels are a dead-ringer for the wheels used on the Mako Shark-II and are shod with period-correct Firestone racing tires.
Here’s how Bill commanded his troops; he wanted,“…a narrow, slim, center section and coupe body, a tapered tail, an all-of-a-piece blending of the upper and lower portions of the body through the center (avoiding the look of a roof added to a body), and prominent wheels with their protective fenders distinctly separate from the main body, yet grafted organically to it.”
Mitchell was almost there with the 1962 Monza GT. After the design was nailed down, a full-size, non-running version was built and shown to management in March 1965. It was unanimous; the Mako Shark-II HAD TO BE the next Corvette.
While many of Mitchell’s designed cars had a heavy Italian accent, the Mako Shark-II was a one-of-a-kind original and after 50-plus years is still as head-turner, as Hanspeter’s replica proves!
A Salute to the AWESOME, highly collectible, Baldwin Motion Corvettes
In November 2011 there were a few automotive bomb shells dropped on the MCACN Muscle Car Show. Namely three unique Baldwin Motion Corvettes. One Survivor Phase III 454 Corvette, one restored Motion Mako Shark Corvette, and one garage/barn find Corvette, the ‘76 Can-Am Spyder.
The survivor car is known as the “Ankenbauer Phase III 454 Corvette. The car is currently owned by Dave Belk and is just an amazing Motion survivor car. I have a feature story on this Motion Phase III 454 Corvette coming out in Vette Vues Magazine in a few weeks. After publication, I’ll post the story here. The car is jaw-dropping and the owner’s story rocks!
Dan McMichael is a collector of Motion Corvettes. His latest finished Motion car is the 1970 Motion Maco Shark Corvette. There are many configurations of the Mako design. Both Silva and Motion produced customer Macos AND sold the body kits. This car was built by Motion Performance, according to the customer’s specifications. The restoration of this car is said to be “STUNNING!” From the photos I’ve seen, that adjective is spot on.
And Dan McMichaels scores a second stunner. This might be the most amazing Corvette barn find ever. The car was discovered by Maryland State legislator Rick Impallaria when he was clearing out cars and hardware after evicting a tenant from the auto body shop he was renting. Stashed away was the hulk of an unusual Corvette. Rick was told that the car might be the remains of a Motion Can-Am Spyder Corvette. Rick did some inquiries, including to our sister site, www.BaldwinMotionReport.com, as to what the Corvette community thought this hulk might have been. Turns out it was one of three yellow Can-Am Spyder Corvettes built. And now it’s Dan McMichaels. If anyone will “do right” by the Can-Am Spyder, it’ll be Dan! Continue reading “NEW Motion Performance Corvettes Tribute Art Print”→
A Salute to the design the set the style for America’s sports car, the Corvette.
It’s only been a week or so since the photos of a disguised C7 Corvette surfaced and already the critics are weighing in. One report commented that the profile and proportions look too much like the current C6. And therein lies the designer’s dilemma when it comes to designing a new Corvette. The new design has to “look like a Corvette,” but has to “look new.” This isn’t a new problem actually. But before we come down on the Corvette design team too harshly, we should all just breath… and be patient. Those disguised cars always look bad.
But, there is no doubt that the Corvette’s image will forever be locked into the design that goes all the way back to 1963-1964 when GM’s VP of Design, Bill Mitchell charged his designers with the challenge to, “Design a “narrow, slim, ”selfish” center section and coupe body, a prominently tapered tail, an “all of one piece” blending of the upper and lower portions of the body, prominent wheels with protective fenders, distinctively separate from the main body, yet gaffed organically to it.” The end result was the Mako Shark-II. Continue reading “NEW Mako Shark Tribute Art Print From K. Scott Teeters”→
So, you want to build yourself a Maco Corvette? Get your work clothes!
We were very pleased with the response to our Mako Shark Attack Week from the beginning of January 2012. I first saw the Mako Shark-II back in ‘66 and thought it was the most stunning car I’d ever seen. It looked like what I had imagined “cars from the future” would look like. Obviously, I wasn’t the only one that was touched, moved, and inspired.
The Cliff Notes version of the Mako Shark-II story is this. Chevrolet blows minds with the non-running Mako Shark-II at the New York World’s Fair in 1965. The crowds went wild and told Chevrolet, “We want one!” And Chevrolet said, “We’ll get right on it!” The running Mako Shark-II with it’s big 427 big-block engine was just “out’a sight!” But when the Mako Shark-II-inspired ‘68 Corvette came out, some said, “What’s that? That’s not a Mako Shark!” One guy took it upon himself to build his own Mako Shark-II body for the new Corvette. John Silva’s “Maco Shark” Corvette body kit filled the void that Chevrolet created. Silva’s Maco kit got the attention of Motion Performance’s Joel Rosen, who had recently unleashed his Phase III GT Corvette, and was looking for something even more exotic to offer his Motion customers. Rosen and Silva made a deal and the rest is history. Motion and Silva made a few turnkey Maco Sharks and sold LOTS of body kits and parts.
Same basic body kit as the photo on the top. Who knows what happened, but something went terribly wrong with this poor Maco Shark.
The kit car industry has come a long way since the ‘60s when Meyers-Manx, Fiberfab, Silva, Motion, and others were selling kits. The nature of kits cars is that most are never completed, with electrical issues usually being the number one issue. What it comes down to is that for a kit car to turn out great, you need excellent craftsmen and a fair amount of cash. A fully-functional kit car can be as complicated as a manufactured car. Continue reading “1974 Maco Shark Corvette Build Project”→
As groovy as the new C3 1968 Corvette looked to most Vette fans, for some, it wasn’t what they were expecting. What they were expecting was what they’d been drooling over since ‘65 – a production version of the “Mako Shark” show cars. They didn’t want to hear a lot of bunk about what can or can’t be manufactured or that the Mako’s front fender humps were too tall. They wanted the Mako Shark-II, period!
While some grumped and grumbled, one man did something about it. He made his own Mako Shark-II. And to prevent GM from crashing down on his head, he called it the “Maco Shark.” John Silva produced the first total body kit for the late model, C3 Corvette. The only part of the exterior body that was production Corvette was the windshield. While the completed kit wasn’t a 100% dead ringer for Bill Mitchell’s Mako Shark-II, it was close enough for many. But what put the Silva Maco on the map was the guy from Long Island that was already building Chevy supercars and could make sure the Maco had gobs of grunt. Yes, Joel Rosen.
Joel Rosen, along with PR master, Marty Schorr, editor of CARS Magazine, were already in the thick of things with their Baldwin-Motion Phase-III Supercars. Their line of turn-key, bad-ass Super Chevys was called, “The Fantastic Five.” You can get a heap’n help’n of Baldwin-Motion dishes at our sister blog site, www.BaldwinMotionReport.com. While the sales of Phase-III Supercars was cooking along in 1969, Rosen was thinking ahead and working out the details of his Phase-III GT Corvette. Rosen’s plan was to offer a true GT (Grand Touring) version of his Phase-III Corvette. The classic GT car configuration used a stout frame and chassis, plenty of power, excellent brakes, creature comforts, and room for travel bags. GT cars were essentially a sport coupe that you would use for a long trip – a “grand” “tour.” In other words, a “big trip.” C3 Corvette Coupes are short on usable space, so Rosen created a fastback rear window to open up the back storage area to hold those small travel bags for his customer’s, “Grand Tour.”
So, around the same time Rosen started offering his Phase-III GT Corvette, John Silva was making his own version of the Mako Shark, marketed under the name “Maco Shark.” The two men worked out a deal and Motion Performance started offering their own turn-key Motion Macos and Maco body kits. Here’s where things get a little muddy. Removing the complete production Corvette body and replacing it with the Maco was VERY labor intensive and expensive. So, very few Motion-built Macos were produced.
This Maco Shark was a barn find car! It's a real beauty today.
However, lots of body kits were sold and if you’ve ever been involved in the kit car hobby, you know that most kits are not completed. For the cars that were completed, some were better than others and depended on Continue reading “Mako Shark Attack Week!!! The Motion / Silva Macos”→
Dateline 2-4-18, Photos by Hans Peter Bohi and GM Archives – This article first appeared in the April 2018 issue of Vette Magazine. 
