Tag: Moray Eel Corvette

NEW Motion Performance Corvettes Tribute Art Print

Published on by Scott

Dateline: 1.29.1

A Salute to the AWESOME, highly collectible, Baldwin Motion Corvettes

In November 2011 there were a few automotive bomb shells dropped on the MCACN Muscle Car Show. Namely three unique Baldwin Motion Corvettes. One Survivor Phase III 454 Corvette, one restored Motion Mako Shark Corvette, and one garage/barn find Corvette, the ‘76 Can-Am Spyder.

The survivor car is known as the “Ankenbauer Phase III 454 Corvette. The car is currently owned by Dave Belk and is just an amazing Motion survivor car. I have a feature story on this Motion Phase III 454 Corvette coming out in Vette Vues Magazine in a few weeks. After publication, I’ll post the story here. The car is jaw-dropping and the owner’s story rocks!

Dan McMichael is a collector of Motion Corvettes. His latest finished Motion car is the 1970 Motion Maco Shark Corvette. There are many configurations of the Mako design. Both Silva and Motion produced customer Macos AND sold the body kits. This car was built by Motion Performance, according to the customer’s specifications. The restoration of this car is said to be “STUNNING!” From the photos I’ve seen, that adjective is spot on.

And Dan McMichaels scores a second stunner. This might be the most amazing Corvette barn find ever. The car was discovered by Maryland State legislator Rick Impallaria when he was clearing out cars and hardware after evicting a tenant from the auto body shop he was renting. Stashed away was the hulk of an unusual Corvette. Rick was told that the car might be the remains of a Motion Can-Am Spyder Corvette. Rick did some inquiries, including to our sister site, www.BaldwinMotionReport.com, as to what the Corvette community thought this hulk might have been. Turns out it was one of three yellow Can-Am Spyder Corvettes built. And now it’s Dan McMichaels. If anyone will “do right” by the Can-Am Spyder, it’ll be Dan! Continue reading “NEW Motion Performance Corvettes Tribute Art Print” →

Mako Shark Attack Week!!! The Motion / Silva Macos

Published on by Scott3 Comments

Dateline: 1.6.12

More Mako Shark-II that a Production C3 Corvette

As groovy as the new C3 1968 Corvette looked to most Vette fans, for some, it wasn’t what they were expecting. What they were expecting was what they’d been drooling over since ‘65 – a production version of the “Mako Shark” show cars. They didn’t want to hear a lot of bunk about what can or can’t be manufactured or that the Mako’s front fender humps were too tall. They wanted the Mako Shark-II, period!

While some grumped and grumbled, one man did something about it. He made his own Mako Shark-II. And to prevent GM from crashing down on his head, he called it the “Maco Shark.” John Silva produced the first total body kit for the late model, C3 Corvette. The only part of the exterior body that was production Corvette was the windshield. While the completed kit wasn’t a 100% dead ringer for Bill Mitchell’s Mako Shark-II, it was close enough for many. But what put the Silva Maco on the map was the guy from Long Island that was already building Chevy supercars and could make sure the Maco had gobs of grunt. Yes, Joel Rosen.

Joel Rosen, along with PR master, Marty Schorr, editor of CARS Magazine, were already in the thick of things with their Baldwin-Motion Phase-III Supercars. Their line of turn-key, bad-ass Super Chevys was called, “The Fantastic Five.” You can get a heap’n help’n of Baldwin-Motion dishes at our sister blog site, www.BaldwinMotionReport.com. While the sales of Phase-III Supercars was cooking along in 1969, Rosen was thinking ahead and working out the details of his Phase-III GT Corvette. Rosen’s plan was to offer a true GT (Grand Touring) version of his Phase-III Corvette. The classic GT car configuration used a stout frame and chassis, plenty of power, excellent brakes, creature comforts, and room for travel bags. GT cars were essentially a sport coupe that you would use for a long trip – a “grand” “tour.” In other words, a “big trip.” C3 Corvette Coupes are short on usable space, so Rosen created a fastback rear window to open up the back storage area to hold those small travel bags for his customer’s, “Grand Tour.”

So, around the same time Rosen started offering his Phase-III GT Corvette, John Silva was making his own version of the Mako Shark, marketed under the name “Maco Shark.” The two men worked out a deal and Motion Performance started offering their own turn-key Motion Macos and Maco body kits. Here’s where things get a little muddy. Removing the complete production Corvette body and replacing it with the Maco was VERY labor intensive and expensive. So, very few Motion-built Macos were produced.

 

This Maco Shark was a barn find car! It's a real beauty today.

However, lots of body kits were sold and if you’ve ever been involved in the kit car hobby, you know that most kits are not completed. For the cars that were completed, some were better than others and depended on Continue reading “Mako Shark Attack Week!!! The Motion / Silva Macos” →

Joel Rosen’s Motion Can-Am Spyder Corvette

Published on by Scott

The Last of the Motion Corvettes

By the late ‘60s, big-block Chevys were always contenders against anything from Ford and Mopar. Within the story line of muscle car history, the Baldwin-Motion Supercars are legends. For John Q. Public, a regular muscle car was often times more than enough. Then there were those who wanted more.

In the mid-’60s, Long Island speed shop owner Joel Rosen had areputation for building tough street and strip cars. Unlike Carroll Shelby’s deal with Ford to build quasi-SCCA Mustangs, Rosen struck with local dealer Baldwin Chevrolet to offer supercar versions of new Chevy muscle cars that were custom built to order and guaranteed to run 11.5 in the quarter-mile with a qualified driver.

From ‘67 through ‘73, Rosen and his team cranked out hundreds of unique Chevy supercars. But his most exotic cars were some of the Corvettes. Continue reading “Joel Rosen’s Motion Can-Am Spyder Corvette” →

Baldwin-Motion Phase III Shark Corvettes – Part 3 of 3

Published on by Scott2 Comments

Joel Rosen’s Sharks

Joel Rosen’s meca for Chevy supercars – Motion Performance on Rising Sun Highway, Long Island, New York. Note the custom fish-scales paint job! The Phase III Vega behind the Maco Shark was the car that brought the Feds crashing down on Motion performance.

As the new ‘63 Corvettes were hitting the showrooms, GM’s Chief of Styling, Bill Mitchell, was dreaming up the next Corvette. With the help of stylist Larry Shinoda and a small team of designers, the radical Mako Shark II was shown to GM’s management in Spring of ‘65. The non-running full-size mock up made jaws drop. Before the car was shipped to the New York International Auto Show, the order was given, “build a running version!” By October ’65 the running version of the new design was complete and headed out to the show car circuit where it received rave reviews. It was obvious – the Mako Shark II HAD TO BE the next production Corvette.

You can catch Part 1 HERE.

And Part 2 HERE.

Continue reading “Baldwin-Motion Phase III Shark Corvettes – Part 3 of 3” →