Dr. Rollings’ 1971 Phase III GT Corvette “The Most Expensive of All the Motion Corvettes”

Published on May 2, 2014May 2, 2014 by Scott

Baldwin Motion Phase III GT Corvette Survivor!!!

Date: 5.2.14 – Time has been kind to the Baldwin Motion Supercars. Today, complete and restored Motion cars are very valuable. Yenko cars have the pedigree of being COPO cars, but unlike the Phase III cars, they could not be personalized. Enter Joel Rosen, Marty Schorr, and the Baldwin Motion experience.

Rosen was the owner of Motion Performance in Baldwin, New York and Schorr was the editor of CARS Magazine (and founder of VETTE). The young men conceived of offering custom-built supercars through local dealer, Baldwin Chevrolet. Rosen knew how to build a Chevy muscle car into a dependable, supercar, with performance over-and-above the factory level. Joel spun the wrenches and Marty spun the spin. Schorr kept the sizzle hot with CARS Magazine “special road tests,” in-your-face ads, special features, and catalogs. A Motion supercar was guaranteed to run the quarter-mile in 11.5-seconds with a qualified driver. When a customer took delivery of their Phase III supercar, they were driving a custom-made supercar. It was all very heady stuff.

Rosen’s higher vision was to offer an American GT machine based on the big-block Corvette. Joel started with his basic 500-plus horsepower Phase III Corvette and added custom bodywork that included a fastback rear window that opened up the rear cargo area of the C3 Corvette. The car was christened the “Phase III GT.” A “regular” Phase III Corvette was already a beast, but if you wanted the next level, the Phase III GT offered all the performance hardware, plus unique, head-turning custom bodywork. The Phase III GT Corvette was Rosen’s vision of the ultimate Motion car for customers with deep pockets. Rosen expected to produce 10-to-12 Phase III GT Corvettes a year, but only made 12 cars from ‘69 to ‘71. Continue reading “Dr. Rollings’ 1971 Phase III GT Corvette “The Most Expensive of All the Motion Corvettes”” →

NEW Motion Performance Corvettes Tribute Art Print

Published on January 29, 2012January 29, 2012 by Scott

Dateline: 1.29.1

A Salute to the AWESOME, highly collectible, Baldwin Motion Corvettes

In November 2011 there were a few automotive bomb shells dropped on the MCACN Muscle Car Show. Namely three unique Baldwin Motion Corvettes. One Survivor Phase III 454 Corvette, one restored Motion Mako Shark Corvette, and one garage/barn find Corvette, the ‘76 Can-Am Spyder.

The survivor car is known as the “Ankenbauer Phase III 454 Corvette. The car is currently owned by Dave Belk and is just an amazing Motion survivor car. I have a feature story on this Motion Phase III 454 Corvette coming out in Vette Vues Magazine in a few weeks. After publication, I’ll post the story here. The car is jaw-dropping and the owner’s story rocks!

Dan McMichael is a collector of Motion Corvettes. His latest finished Motion car is the 1970 Motion Maco Shark Corvette. There are many configurations of the Mako design. Both Silva and Motion produced customer Macos AND sold the body kits. This car was built by Motion Performance, according to the customer’s specifications. The restoration of this car is said to be “STUNNING!” From the photos I’ve seen, that adjective is spot on.

And Dan McMichaels scores a second stunner. This might be the most amazing Corvette barn find ever. The car was discovered by Maryland State legislator Rick Impallaria when he was clearing out cars and hardware after evicting a tenant from the auto body shop he was renting. Stashed away was the hulk of an unusual Corvette. Rick was told that the car might be the remains of a Motion Can-Am Spyder Corvette. Rick did some inquiries, including to our sister site, www.BaldwinMotionReport.com, as to what the Corvette community thought this hulk might have been. Turns out it was one of three yellow Can-Am Spyder Corvettes built. And now it’s Dan McMichaels. If anyone will “do right” by the Can-Am Spyder, it’ll be Dan! Continue reading “NEW Motion Performance Corvettes Tribute Art Print” →

Mako Shark Attack Week!!! The Motion / Silva Macos

Published on January 6, 2012 by Scott3 Comments

Dateline: 1.6.12

More Mako Shark-II that a Production C3 Corvette

As groovy as the new C3 1968 Corvette looked to most Vette fans, for some, it wasn’t what they were expecting. What they were expecting was what they’d been drooling over since ‘65 – a production version of the “Mako Shark” show cars. They didn’t want to hear a lot of bunk about what can or can’t be manufactured or that the Mako’s front fender humps were too tall. They wanted the Mako Shark-II, period!

While some grumped and grumbled, one man did something about it. He made his own Mako Shark-II. And to prevent GM from crashing down on his head, he called it the “Maco Shark.” John Silva produced the first total body kit for the late model, C3 Corvette. The only part of the exterior body that was production Corvette was the windshield. While the completed kit wasn’t a 100% dead ringer for Bill Mitchell’s Mako Shark-II, it was close enough for many. But what put the Silva Maco on the map was the guy from Long Island that was already building Chevy supercars and could make sure the Maco had gobs of grunt. Yes, Joel Rosen.

Joel Rosen, along with PR master, Marty Schorr, editor of CARS Magazine, were already in the thick of things with their Baldwin-Motion Phase-III Supercars. Their line of turn-key, bad-ass Super Chevys was called, “The Fantastic Five.” You can get a heap’n help’n of Baldwin-Motion dishes at our sister blog site, www.BaldwinMotionReport.com. While the sales of Phase-III Supercars was cooking along in 1969, Rosen was thinking ahead and working out the details of his Phase-III GT Corvette. Rosen’s plan was to offer a true GT (Grand Touring) version of his Phase-III Corvette. The classic GT car configuration used a stout frame and chassis, plenty of power, excellent brakes, creature comforts, and room for travel bags. GT cars were essentially a sport coupe that you would use for a long trip – a “grand” “tour.” In other words, a “big trip.” C3 Corvette Coupes are short on usable space, so Rosen created a fastback rear window to open up the back storage area to hold those small travel bags for his customer’s, “Grand Tour.”

So, around the same time Rosen started offering his Phase-III GT Corvette, John Silva was making his own version of the Mako Shark, marketed under the name “Maco Shark.” The two men worked out a deal and Motion Performance started offering their own turn-key Motion Macos and Maco body kits. Here’s where things get a little muddy. Removing the complete production Corvette body and replacing it with the Maco was VERY labor intensive and expensive. So, very few Motion-built Macos were produced.

4-Custom-Motion-Maco — This Maco Shark was a barn find car! It's a real beauty today.

However, lots of body kits were sold and if you’ve ever been involved in the kit car hobby, you know that most kits are not completed. For the cars that were completed, some were better than others and depended on Continue reading “Mako Shark Attack Week!!! The Motion / Silva Macos” →

Vote For Your Favorite Baldwin-Motion Corvette

Published on May 16, 2011May 16, 2011 by Scott

Which Baldwin-Motion Corvette is YOUR FAVORITE?

(scroll down to cast your vote)

From 1967 to 1978 Joel Rosen, Marty Schorr, and the crew produced an astonishing array of Chevy supercars. “The Fantastic Five” included the Biscayne, the Nova, the Chevelle, the Camaro, and Corvette. If you wanted a true sleeper supercar, the Biscayne was the way to deliver one heck of a surprise. While the big 427 and 454 monster cars got most of the attention, Mr. Motion would build you whatever you wanted. So, there were also a few Motion cars powered with enhanced 350 small-blocks, and a few Corvettes that received turbochargers!

All of the Baldwin-Motion cars were special and unique, but let’s face it, the Corvettes were the halo cars. Since every Motion supercar was custom-built according to the customer’s wants and checkbook, every car is slightly different. The only thing standard was Joel’s selection of heavy-duty after market parts needed to keep the machine relatively bulletproof.

From ‘68 to ‘78, there were six distinctive Baldwin-Motion Corvettes. Let’s have a look-see… Continue reading “Vote For Your Favorite Baldwin-Motion Corvette” →

1969 Baldwin-Motion Phase III GT Corvette – Part 2 of 3

Published on December 20, 2010May 25, 2011 by Scott

Joel Rosen Builds A Grand Touring Corvette

The term “GT” is arguably one of the most misused automotive designations. The term is an abbreviation for “grand touring.” A GT car is a road-going, lightweight, semi-luxurious coupe built on a high-performance chassis, for long trips, you need a car with plenty of power, a strong chassis, and loads of creature comforts to make the journey pleasant. Most high-priced European car companies all offered GT cars for their affluent customers.

In the ‘60s, Detroit carmakers started to use the GT term on pony and mid-size cars. Many enthusiasts wanted more and sought the help of specialty shops to build a package car. The original Shelby Mustangs were turn-key supercars. But at a small shop in Baldwin, New York, Joel Rosen was making his own machines called the Baldwin-Motion SS and Phase III Supercars.

You can catch Part 1 HERE.

Part 3 is HERE.

Continue reading “1969 Baldwin-Motion Phase III GT Corvette – Part 2 of 3” →

The Last Baldwin-Motion Phase III GT Corvette!

Published on September 26, 2010May 25, 2011 by Scott

Adam Tuckman’s “Dr. Rollings'” 1971 Baldwin-Motion Phase III GT Corvette To Debut At Muscle Car & Corvette Nationals!

Story & Photos by Martyn L. Schorr

Intro: I was just a car-crazed lad when I saw my first Baldwin-Motion Phase III Corvette on the cover of CARS Magazine. The bright yellow machine had ‘67 side-pipes, the Baldwin-Motion signature-style ‘67 big-block Corvette hood scoop on top of the ‘68 big-block hood dome, a GTO hood-mounted tach, flares on the wheel openings and deep-dish Cragar mags. WOW! What’a sight! Joel Rosen made sure the cars had a heap’n help’n of red meat and Marty Schorr, CARS editor and Motion coconspirator, made sure there was plenty of sizzle!

Baldwin-Motion cars went on to delight Chevy lovers for years and quickly became legends. In ‘69, Rosen turned the Phase III Corvette to the Baldwin-Motion Phase III GT – the most expensive of all of the Baldwin-Motion cars. After specialty cars roll (or peal out) out the door, many live hard, hard lives, with less than happy endings. But then some become cherished members of their owners families. This is the story of a much loved and enjoyed Phase III GT Corvette.

So, with much delight, let me turn this story over to the ultimate Baldwin-Motion spin master, Martyn L. Schorr. Take it away, Marty! – KST

Not all Vettes are red. Many of Duntov’s mule Corvettes were white – so were most of Bill Jenkins race cars and Jim Hall’s Chaparrels. Sano white was Dr. Rollings color choice for his personal Grand Touring Corvette.

Purchased from the original owner’s family in 2008, Adam Tuckman’s 1971 Baldwin-Motion Phase III GT Corvette is the last built, highest-optioned and most original known. Between 1969 and 1971, Joel Rosen produced just 12 GTs. Continue reading “The Last Baldwin-Motion Phase III GT Corvette!” →